Thousands of verified Experts are ready to answer your specific questions 24/7.
Satisfaction is guaranteed and you pay your Expert only if you are satisfied.
Just type your detailed question and click "Get an Answer."
In minutes you'll get a response from an Expert. You can always ask follow-up questions.
Happy with your answer? Just click "Accept" to pay your Expert.
My fisher paykel washer model iwl12 has stopped in mid wash and the display and all the indicator lights are flashing. i turn it off and back on and it starts up of about 2-3 seconds and the it repeats the shutting off and flashing of the indicator lights and display
Optional Information: Make: fisher paykel Model: iwl12 Already Tried: turn the power off and on a couple of times and also hooked up to an extension cord to see if it was possibly the outlet i had it plugged into. the problem still exists
Hello, and thank you for using this service. I'll be helping you with your problem today.When the washer is stopping is it beeping at you as well? Is there an error code on the display control panel?
Yes the washer is beeping as well. i get no error code. but this morning i tried to turn it on to drain the standing water. when i first turned it on the display read "power cut" restarting in 10 seconds". this situation has occurred twice before but always started back up. I was able to get the water drained. but the problem still exists
ok, so this sounds like your main relay control board under your control panel in the far back right corner is just shorted and will need to be replaced. The part generally costs about $150.
how hard will be for me to replace this myself if i purchase
the part
not too dificult. Just lift the lid at a 45 degree angle and yank the lid straight off. Then remove the 2 philps screws coming in from the back of the control panel. The control panel will then pull up and off.
Appliance Technician
7+ years being an appliance technician with factory training