Thousands of verified Experts are ready to answer your specific questions 24/7.
Satisfaction is guaranteed and you pay your Expert only if you are satisfied.
Just type your detailed question and click "Get an Answer."
In minutes you'll get a response from an Expert. You can always ask follow-up questions.
Happy with your answer? Just click "Accept" to pay your Expert.
I have a two drawer FisherPakel dishwasher installed in 2009.[Model DD 6051n Serial Number 88469-A] I've used the lower drawer perhaps 5 times since the installation. I'm getting a fault code (F9) that says it's an Electronics malfunction. I cut off the power supply, and then re-powered, and pushed to On Button. Same Fault Code.
Optional Information: Make: Fisher Paykel Model: DD 6051 Already Tried: Turned Dishwasher drawer off, cut the power supply, turned power on, turned dishwasher on, same fault code.
Hello, and thank you for using this service. I'll be helping you with your problem today.F9 means that your mains filter board has shorted and will need to be ordered and replaced. If you remove the bottom drawer there is a small control board in the far back left corner mounted to the floor in the dishwasher. This is your mains filter board and it will need to be ordered and replaced to fix the error code. Below is a link to the part you'll need to order--they call it the "mod chassis".CLICK HERE
Appliance Technician
7+ years being an appliance technician with factory training