Thousands of verified Experts are ready to answer your specific questions 24/7.
Satisfaction is guaranteed and you pay your Expert only if you are satisfied.
Just type your detailed question and click "Get an Answer."
In minutes you'll get a response from an Expert. You can always ask follow-up questions.
Happy with your answer? Just click "Accept" to pay your Expert.
i have Whirlpool Quiet partner II dishwasher, Serial #FY1011714, Model # XXXXX a few days ago, it started leaking large amounts of water from the left side of the front, presumably corner of the door, have checked no gasket seems cracked or gone, door is closed as before, what could cause, and what to do??
Optional Information: Make: Whirlpool Quiet Partner II Model: DU1055XTVSO Already Tried: Moping floor-ha, checked to make sure door is closed tight, gasket up side is not cracked or loose???
Hello, and thank you for using this service. I'll be helping you with your problem today.You'll want to pull the dishwasher out about a foot an run it to make sure it's coming from the door area. If so, then just replace the gasket because for one reason or another it's not sealing up properly anymore. The other thing that is on the left side is the water valve intake. Sometimes the intake will go bad and water will spill out the hole in the top when the dishwasher is filling. IF that is the case then the intake would need to be replaced.
will this be forwarded to my e-mail address?, as I am on laptop and can't print right now, I think this will help me, at least know where to start, thanks for your time.
Yes. After you accept you get a link to come back here to read the conversation or ask follow-up questions at no charge for up to 30 days if you'd like.
Appliance Technician
7+ years being an appliance technician with factory training