Thousands of verified Experts are ready to answer your specific questions 24/7.
Satisfaction is guaranteed and you pay your Expert only if you are satisfied.
Just type your detailed question and click "Get an Answer."
In minutes you'll get a response from an Expert. You can always ask follow-up questions.
Happy with your answer? Just click "Accept" to pay your Expert.
I have a Kitchenaide dishwasher model KUDP01FL. The machine will not start. The green "clean" light is flashing 7 times. This has occurred once before. The solution was to press the control panel buttons in a manner that reset the machine but I cannot remember the sequence or which buttons.
Optional Information: Make: Kitchenaide Model: KUDP01FL
Hello, my name is Dave. The blinking clean light indicates that there was a problem heating the water. It may be the water was too cold or it could be a problem with the heater or door switch in series with the heat circuit. To restore your DW to operation as you know is to run the diagnostic cycle. Here is how to enter and advance through.To start diagnostics, press the following keys in order in less than 6 seconds
High Temp Scrub (Power Scour) , Air Dry, High Temp Scrub (Power Scour) , Air Dry
If there really is a problem in the heat circuit the clean light may begin to blink again after you use it a while. If there is a problem it won't be long and the clean light will be blinking again. Please ask if you have additional questions.
Dave
Home Appliance Technician
30 years experience specializing in Whirlpool, KitchenAid and Kenmore