Thousands of verified Experts are ready to answer your specific questions 24/7.
Satisfaction is guaranteed and you pay your Expert only if you are satisfied.
Just type your detailed question and click "Get an Answer."
In minutes you'll get a response from an Expert. You can always ask follow-up questions.
Happy with your answer? Just click "Accept" to pay your Expert.
I just bought a Whirlpool WED7600X Dryer and hooked it up. Everything powers up, with no faults, the start/pause light blinks and blinks and blinks. Thats it, I can go threw all the different modes and setting but I can't get it to start a cycle????
Welcome..Sorry internet problems...Sounds like you have a doors witch problem..The dryer would need to be put through a self diagnostic test..CLICK HERE FOR TESTING Thanks Bob
I see this question is still open..Please let me know if you have any further questions..If not once using the accept option pays me for my time helping you ..Thanks Bob
I cant enter that mode by doing what the manual is telling me. Use a sequence of three buttons, hitting them in the same order 3 times within 8 seconds. Nothing happens, I'm doing this with it plugged in but with the power button off. Next tip, please.
Here is different tech sheet CLICK HERE First let me know if you are able to get it into diagnostics mode.
Ok, that got me in. I'll try to get back with you as soon as I can. Thanks
You should have no problem trouble shooting with the manual it covers everything on this unit..Also make sure you use the accept option before leaving for my time helping you ..Thanks Bob
Home Appliance Tech
23 Years Major Appliance Repair
It ran it's test cycle and was fine, no faults. So I powered it up and the same thing. I'll Accept your answer, but if you have any more suggestions feel free to send them. Thanks