How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob
Rob, Home Appliance Technician
Category: Appliance
Satisfied Customers: 420
Experience:  20 yrs. experience with a major worldwide manufacturer.
14831508
Type Your Appliance Question Here...
Rob is online now

beko A+A class, door not opening, spin light on panel is lit,

Customer Question

beko A+A class, door not opening, spin light on panel is lit, however, not sure if spin cycle completed, unable to manually cancel using overide button as this is not accepted
Submitted: 4 years ago.
Category: Appliance
Expert:  Daniel replied 4 years ago.

Hi

.

Can you post the model number please.

.

Also is the washer still full of water?

.

Regards

Customer: replied 4 years ago.

BEKO. WM6143W. Not full of water but may be a little in drum/hard to tell.

Expert:  Daniel replied 4 years ago.

Hi

.

Ok remove the plastic trim on the front at the bottom and there you will see the filter.

.

You need to unscrew this and pull it out and give it a good clean in there and make sure the pump isnt blocked at the back were the filter goes in.

.

But if theres water still in there you will need to drain it out. If you can pull the washer out and lower the drain hose into a bucket and gravity will drain it out.

.

Or get a shallow dish and put under the filter and just slacken the filter and drain it out that way.

.

Once all clear refit the filter and reset the control panel again and see how it goes from there.

.

Let me know what happens.

.

Regards