It's no uncommon for Beko to change a design and not update the manual.
Can you post a photograph of the clamps to see if I recognise the ones you've received?
Attachments are only available to registered users.Register Here
Attachments are only available to registered users.
Sorry, there's no photograph showing, just a box with an X in the corner.
Can you try again? or, upload the picture to a file sharing site and post a link to it here.
Hi could you send me your email address please i dont no how to upload picture thanks
Sorry, just answer don't allow direct contact.
However, if you send it to customer services they will pass it on.
Sorry for the delay, I've only just received the picture of the fixing bracket.
On the underside of the hob, there should be slots for the right hand side of the bracket to fit into.
The left side presses against the underside of the worktop.
There should be a screw goes through one of the holes into the underside of the hob.
Do you have the slot and screw hole for this bracket to fit into?