How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob
Rob, Home Appliance Technician
Category: Appliance
Satisfied Customers: 420
Experience:  20 yrs. experience with a major worldwide manufacturer.
14831508
Type Your Appliance Question Here...
Rob is online now

Hi my Siemens dishwasher not working found power tripped This

Customer Question

Hi my Siemens dishwasher not working found power tripped
This morning reset then Big Bang from back of unit where cable
Enters the unit. I cannot access as plastic cover over it but signs of
A short (black marks) showing..is it dead??
Model is the aventgarde in black,
Help!!!
Submitted: 4 years ago.
Category: Appliance
Expert:  Techdesk replied 4 years ago.

Hiya,

You need to unplug the appliance, take the top and side panel off.

You should be able to see the cable entering and it should have a suppressor it attaches to.

This is the likely part that has blown.

 

Check it out, see what you find and get back to me.

Also, let me know the E-Nr number of the appliance so I can have a look at the diagrams.

 

I'll be out at work during the day but I'll pick up again when I get home.

 

Thanks

Customer: replied 4 years ago.
Hi how do I get side and top off? I have had a look and
Only found 4 screws in front for side panel and 2 low down at the back
Taken them out but top or side not comin open
Expert:  Techdesk replied 4 years ago.

Hiya,

The top is normally clips that you push up so the lid slides rearward.

The screws are normally down the front edge.

 

I still need the E-Nr number.

 

Thanks