How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 15979
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your Appliance Question Here...
Daniel is online now

We had a power cut yesterday - the cycle was interupted. The

Customer Question

We had a power cut yesterday - the cycle was interupted. The display reads E06 and we can't open the door. We cant see if there is any water in the drum.
Submitted: 4 years ago.
Category: Appliance
Expert:  Daniel replied 4 years ago.

Hi

 

E06 is a draining error code.

 

What you need to do is check the filter. Remove the plastic trim on the front at the bottom and the filter is there.

 

Get a shallow try under there and slacken the filter and drain the water out from there.

 

Once the water is out you can then fully unscrew the filter. From there clear out any debris in there.

Then look inside the chamber were the filter goes and you will see the pump impeller at the back X shape.

Check theres nothing stuck in there stopping the impeller from turning.

 

Once its all clear refit the filter and retry the washer. Fingers crossed this will get the washer back up and running again.

 

If you need anymore info just get back to me.

 

Regards

Related Appliance Questions