Possibility is the pressure chamber or hose (pressure chamber to sump) is blocked and the microswitch is being activated because the water is not entering the tank quick enough. Isolate from electric, remove lid and left panel (looking from the front). There is a plastic chamber bottom right of left side with two microswitches, either this is blocked or the hose that runs from it to the right and along the back of the kick panel and into the sump. Clear either or both (make sure all hoses are pushed true when repositioning).
- Firstly, the float assembly (an orange looking float in a little chamber, visible if you take off the left-hand panel of the machine)
Please check the solution info listed below and please rate my service as good or better and the system will allow me to schedule free follow ups with you at no additional cost to you:-)
I will be here to help you until we have this fixed.
Thanks Michael. Have decided job is likely too big & risk of causing damage. So have decided to call a neff engineer in to solve problem.
Expensive - yes I know, but more sure of a lasting fix.
Will be able to learn from him as work proceeds for next time I may have a broblem.
Do you have name & contact of Neff engineer within the South Manchester area?
Hi unfortunately they don't list them like that but, the good thing is that most of the local appliance Techs local to you do service Neff:-)
I will still be here for you even after you rate my service.
Please don't forget to rate before you close this page, Thank you!
Have a great day Bob!