How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Anthony F. Your Own Question
Anthony F.
Anthony F., Technician
Category: Appliance
Satisfied Customers: 9830
Experience:  20 yrs. experience as appliance repair technician.
34633555
Type Your Appliance Question Here...
Anthony F. is online now

Hello I have a Whirlpool SCW 1112 washing machine and it has

Customer Question

Hello
I have a Whirlpool SCW 1112 washing machine and it has been temperamental but now will not start a program at all. After selecting any program the drain pump operates for a short while as usual and then as it starts to fill with water (through 2 large holes in the soap drawer compartment into the 4th part of the soap drawer which is not detergent 1, detergent 2 or softener part) it displays 'Fod' flasing. The minimalist book says that there is too much foam. Once the water stops coming in, it shows Fault Code F35. Can you throw any light on this please?
Submitted: 4 years ago.
Category: Appliance
Expert:  Anthony F. replied 4 years ago.

Anthony F. :

You have a bad pressure switch

Anthony F. :

the machine thinks its full of water

Anthony F. :

FOD FLOOD

Anthony F. :

F35---Too much water in machine

Anthony F. :

Replace the water pressure switch and check the hose for obstruction