How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jon Your Own Question
Jon
Jon, Home Appliance Technician
Category: Appliance
Satisfied Customers: 3627
Experience:  Home appliance technician with over 12 years experience.
60802242
Type Your Appliance Question Here...
Jon is online now

My double oven which is quite old but has not been in daily

Customer Question

My double oven which is quite old but has not been in daily use, has started flashing when you put the oven on. Normally the lights just go on as you set the temperature. The oven is working but I am concerned about the lights flashing.

Submitted: 3 years ago.
Category: Appliance
Expert:  Jon replied 3 years ago.

Jon :

hello

Jon :

My name is Jon and I am an appliance expert and I can help you today.

Jon :

When you say the lights flash, are you referring to the lights in the display on the control board? or the lights inside the oven cavity?

Jon :

What is the full model number of the oven?

Jon :

Please get back to me here and I will help you more.

Jon :

Thanks.

JACUSTOMER-d3kd1xkg- :

The lights that are flashing are on the control board.

JACUSTOMER-d3kd1xkg- :

These flash when the timer is not correct but suddenly they are flashing.

JACUSTOMER-d3kd1xkg- :

I can't find the number or the manual, it just says Belling formula Turbo.

JACUSTOMER-d3kd1xkg- :

It is a double oven sited in housing with a separate ceramic hob.

JACUSTOMER-d3kd1xkg- :

There is no problem with the hob.

Jon : Ok. Thank you for that response.
Jon : of the control is flashing, does it flas handle or f then a number? that would be an error code
Jon : pleasecodes lease tell me if it is flashing an error code.
Jon : if not just un plug the wall oven for ten minutes the plug it back in. This will reset the computer. I that doesn't help then you may need a new board.