How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andrew Smith Your Own Question
Andrew Smith
Andrew Smith, Home Appliance Technician
Category: Appliance
Satisfied Customers: 3629
Experience:  Gas cooker specialist
46681511
Type Your Appliance Question Here...
Andrew Smith is online now

I recently moved into a new property. Heating controller is

Customer Question

I recently moved into a new property. Heating controller is Danfoss TP5000 (not Si). I do not have an instruction manual and I am becoming increasingly frustrated with programming to suit my needs. Firstly, how do I set the clock to the right time? The unit is mains not battery. Thanks
Submitted: 3 years ago.
Category: Appliance
Expert:  Andrew Smith replied 3 years ago.

Andrew Smith : Is this the version with the push buttons under the slider below the clock?
JACUSTOMER-mq5tzk97- : Yes
JACUSTOMER-mq5tzk97- : Think so!
Andrew Smith : Ok, if you slide open the cover and press the programme button
Andrew Smith : you can change the clock at the first press
Andrew Smith : Then you cycle through the programme times until you have set them all
JACUSTOMER-mq5tzk97- : No! The time on the clock is wrong and the above doesn't seem to make it possible to alter time.
Andrew Smith : Ok, sounds like a broken clock.
Andrew Smith : do you need a new one or looking to replace with something different?

Related Appliance Questions