Appliance Repair Questions? Ask a Technician for Answers ASAP
Thank You for using JustAnswer - My name is Tony and I am more than happy to help with your question today.Can you post back a model number so I can check for you.
all it says is that it is a Homark Cuisine on the oven. and I can't find anything written on the hob except Homark
Is the hob separate from the oven.
The model number for the hob is on the underside.You must have taken the hob out already if you can see the wires to the led.
I have looked all over the back and there isn't anything there.
The led is a 250v T120C
If you look at the wires on the led they will be of a certain length that determines they will only fit in one position.Does this model have a power on/off button?
You are correct about the wires but I have three terminals to choose from.
The hob does not have an on off switch
one blue terminal and two reds
The terminals are on a block or regulator then?
Sorry I don't know what the difference is. Can I resume later as an occupational therapist has just come to asses my mum
Yes, just reply back when you are ready.
I am not sure what you mean by that.
I am not sure what you mean by a block or regulator
sorry I had to go but my mum is terminal with cancer and wants to die at home. The OT came and then the doctor. Her cooker is reaslly annoying as people keep leaving the rings switched on because the led dosn't work
There are about 5 terminals on two sides of a block. There are four blockes - one for each ring and the blocks are part of the cooker knobs that control the heat.
I think they are regulators
I think the terminals are on a regulator. There are four of them .
Looks like this is too complicated for me so I think I had better put it all back together as I need to cook on it shortly.
I am sorry to have wasted your time
You are right about the regulators.Just to clarify, have you a led for each of the hotplates or are you referring to the mains power on led.If it is just the power on led then the wires will only be long enough to reach the first regulator.The terminals on the back of the regulator will be numbered like P1, P2 and S1, S2.Let me know if you can see that.