Normally, you only need to dry out the base for the machine to work again.
Try the following, see if it erases the stored code.
- Close the door
- Set program selector switch to
position 0 ("OFF")
position 8 (6:00 o'clock)
- Wait until the start LED is flashing. LED Start/Pause is flashing
- Actuate and hold the
"Spin speed" button
- Set program selector switch to position 9 (turn clockwise) state LED's are illuminated for a period of 3 sec
- Release the
"Spin speed" button.
- Error display "Last program" The error code is displayed via state and spin speed selection LED's.
Let me know what happens.
yep drying out workd
Thanks for letting me know.
Glad you got it sorted out and working.
Hope this helped