How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Techdesk Your Own Question
Techdesk
Techdesk, Service Engineer
Category: Appliance
Satisfied Customers: 16409
Experience:  Whitegoods engineer working for a multibranded national company in the UK
13782322
Type Your Appliance Question Here...
Techdesk is online now

I have a NEFF dishwasher and when I set programme on rinse

Customer Question

I have a NEFF dishwasher and when I set programme on rinse it runs full cycle ok.
When I set it on wash programme it starts and after 3 minutes trips out at main fuse
box.
I have cleaned all filters. Mike Bostock
Submitted: 3 years ago.
Category: Appliance
Expert:  Techdesk replied 3 years ago.

Hiya,

The fault you describe would suggest a fault in the heater circuit of the machine.

The heater, wiring and/or main control board can all cause this.

 

The most likely cause would be the heater.

 

You would need to test this by disconnecting the heater, insulating the wiring and running the machine.

If it trips, it's wiring or control board.

If it runs (won't heat though), it's the heater.

 

Check it out, see how you get on and let me know.

 

Hope this helps

Thanks