How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob
Rob, Home Appliance Technician
Category: Appliance
Satisfied Customers: 420
Experience:  20 yrs. experience with a major worldwide manufacturer.
14831508
Type Your Appliance Question Here...
Rob is online now

hi,my siemens 14s493gb/07 problem, earlier beeping showing

Customer Question

hi,my siemens 14s493gb/07 problem,
earlier beeping showing f 43 fault,
HAVE CLEARED OUT PUMP, FULL OF HAIR GRIPS ECT,
all back together
no response on touch screen.flashing not showing cycle time
Submitted: 4 years ago.
Category: Appliance
Expert:  Techdesk replied 4 years ago.

Hiya,

Is there anything on the display?

What is displayed?

Thanks

Customer: replied 4 years ago.

hi, display showing,


on, temp 40


on, rpm 800


on, finnised in, showing nothing.


also start/pause button just flashing.

Expert:  Techdesk replied 4 years ago.

Hiya,

OK, thanks for that.

I had hoped there was a key symbol showing.

.

Unplug the appliance.

Wait 10 minutes.

Plug back in and see if the control resets.

.

Let me know what happens.

Thanks

Customer: replied 4 years ago.

have done that already

Expert:  Techdesk replied 4 years ago.

Hiya,

OK, I've no idea what you've already done if you don't say in your post.

Sorry.

.

The symptoms you describe would have suggested child lock but the absence of the symbol rules that out.

.

Unfortunately, it points to a control board failure but I can't see how clearing the pump would have caused that.

.

I'll opt out of the question.

See if any of the others have any thoughts on this.

.

Sorry