How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andrew Smith Your Own Question
Andrew Smith
Andrew Smith, Home Appliance Technician
Category: Appliance
Satisfied Customers: 3668
Experience:  Gas cooker specialist
46681511
Type Your Appliance Question Here...
Andrew Smith is online now

Hi, ive got a valiant 824 r1. There is no power reaching the

Customer Question

Hi, ive got a valiant 824 r1. There is no power reaching the pcb(which was replaced in feb). The fuse in the spur is fine and the fuse on the board is also fine? Water presure good and gas working. Anything i should check? Thanks
Submitted: 4 years ago.
Category: Appliance
Expert:  Andrew Smith replied 4 years ago.

Andrew Smith :

Do you have power to the terminal block at the point of entry for the cable?

JACUSTOMER-uk076mt8- : Hi, yes power to the block. Off to get a new pcb in the morning.
Andrew Smith :

If the fuse on the incoming is ok and the fuse on the PCB is good too, then just check power to the fan before you buy the PCB