How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Techdesk Your Own Question
Techdesk
Techdesk, Service Engineer
Category: Appliance
Satisfied Customers: 16409
Experience:  Whitegoods engineer working for a multibranded national company in the UK
13782322
Type Your Appliance Question Here...
Techdesk is online now

My dishwasher DWF70N displays AL01 and will not work. The serial

Customer Question

My dishwasher DWF70N displays AL01 and will not work. The serial no 25707222.
is the fault repairable?
Submitted: 4 years ago.
Category: Appliance
Expert:  Techdesk replied 4 years ago.

Hiya,

Your machine is reporting the anti flood device in the base has been activated.

.

This is normally caused by a leak or spillage (overfoam most likely) in the underside.

.

Unplug the appliance and empty it.

Pull it out.

Put some towels at the rear of the machine.

Tilt the machine rearward until it's almost on it's back (disconnect the services to it if necessary).

Water should drain out.

Once drained, stand the machine upright again and reconnect it.

.

Try it again, it should be working.

If it begins working and fails with the same problem quickly, you most likely have a leak.

.

To check for this, repeat the draining, then take the top and side panels off.

.

Run the machine, watch it filling/working and you need to locate and cure the leak to rectify the problem.

.

Obviously, if you cannot do the work yourself, you'll need to get someone in to do it for you.

.

Get back to me if you need more help or information.

.

Hope this helps

Thanks