Appliance Repair Questions? Ask a Technician for Answers ASAP
Cannot get to the back of the cooker however the instruction booklet says model ml10frs
I intend to get my husband to fix it. Im home alone at moment so cannot move it on my own. But yes it can come out of its gap
The most likely cause of the fault you describe is going to be an open circuit thermal fuse. These are located behind the rear panel of the appliance.
Isolate the power to the appliance.
Pull the machine out and take the rear panels off.
Locate the fuses or cut outs.
Test them to see which has failed.
Obtain and fit replacements and your machine should be working again.
Here are pictures of the thermal fuse and of the thermal cut out.
This should help identify what is fitted to your machine.
Attachments are only available to registered users.
The top one is the thermal fuse.
The bottom one is a thermal cut out.
If you have a thermal fuse, you'll likely need a kit to convert to a cut out as the fuses are no longer supplied. (an upgrade? )
You can get parts at http://www.4beko.co.uk/
Just search the model number (from the label on the rear of the appliance) and thermal.
that should bring up the current part for the machine.
Check it out, see what you find and get back to me if you need more help.
Hope this helps
Hi we have taken the back off and it looks like there has been a fire could it be the fan motor thats over heated and burnt out
Attachments are only available to registered users.Register HereI won't allow me to add the picture, not sure if its because im on the tablet and not the laptop? Which is a sshame Suzanne cos its a interesting photo
DANGEROUS URL REMOVED%2Flogin%2Fcheckpoint%2F&m_sess=c2Vzczo1MzkwODM1OTA6MTk3OjBIZ2l5MDFLcWtpWEh3OjI6MTM4ODI2NDI1ODoxODc1Mg&_rdr
really hope that works
there is electric feed going into the this fan thing
Hope this now works