How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Techdesk Your Own Question
Techdesk
Techdesk, Service Engineer
Category: Appliance
Satisfied Customers: 16409
Experience:  Whitegoods engineer working for a multibranded national company in the UK
13782322
Type Your Appliance Question Here...
Techdesk is online now

I have a siemans washing machine wm14e162gb/06 and it came

Resolved Question:

I have a siemans washing machine wm14e162gb/06 and it came up with three flashing light 1400 spin light, and the 800 spin light and the no spin light.
Submitted: 3 years ago.
Category: Appliance
Expert:  Techdesk replied 3 years ago.
Hiya,
The service manual shows 2 columns of lights, 1 with 5 and 1 with 4.

Number the columns with 1 at the top.
Which numbers flash in the column of 5?
Which numbers flash in the column of 4?

Thanks
Customer: replied 3 years ago.

lights flashing 5, 3, 1.

Expert:  Techdesk replied 3 years ago.
Hiya,
Thanks for that.

You need to cancel the error codes to get it working again, assuming there's no damage to the motor or control board.

Turn to off.

Turn to 6 o'clock position

Wait 2 seconds.

Press and hold the spin button.

Turn to 7.

Wait 2 seconds, release the spin button.

Turn to off.

The machine holds 5 codes so you should only need to clear 5 times.

However, if there's a further fault in the motor circuit, it will generate a new code each time you turn on.

This can be a faulty motor, faulty wiring and/or faulty control.

Give it a try see if the code clears.

Let me know what happens.

Hope this helps
Thanks
Techdesk and other Appliance Specialists are ready to help you
Customer: replied 3 years ago.

I wont be able to try this out until Thursday, I am a washing machine engineer and this was a call today for a customer I will leave feedback then, how can I do that, please let me know

Expert:  Techdesk replied 3 years ago.
Hiya,
You've got emails with links back to this question.
You'll also receive automated mails to get you back.

The spin button can be marked RPM or something similar.

Thanks
Customer: replied 3 years ago.

cheers, paul

Expert:  Techdesk replied 3 years ago.
Hiya,
No problem.

thanks