How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob
Rob, Home Appliance Technician
Category: Appliance
Satisfied Customers: 420
Experience:  20 yrs. experience with a major worldwide manufacturer.
14831508
Type Your Appliance Question Here...
Rob is online now

We have a Bosch LogiXX vented clothes dryer. Recently after

Customer Question

We have a Bosch LogiXX vented clothes dryer. Recently after approx. 4 minutes of running it stopped working and the filter light started flashing and three lines appear on the screen that normally shows the time remaining.
Submitted: 3 years ago.
Category: Appliance
Expert:  Techdesk replied 3 years ago.
Hiya,
Can you post the E-Nr number of the appliance please?
It should be on a label in the door recess.

Thanks
Customer: replied 3 years ago.
E-NR
WTV 74306GB/02 FD 8707 200306
Expert:  Techdesk replied 3 years ago.
Hiya,
Have you checked the duct hose ?
Your machine is reporting a blockage in the filter/ducting

Check the hose is clear and that the ducting isn't blocked.

Let me know what you find.

Thanks
Customer: replied 3 years ago.
Already checked the hose, there is no blockage at all and there is no blockage in the back of the dryer. The only filter I can see is the fluff filter in the door recess. This is also clear.
Customer: replied 3 years ago.
Is that it?
Expert:  Techdesk replied 3 years ago.
Hiya,
Sorry, I was offline when you replied.

I'm not to know what you've already checked if you don't say so in your initial post.

Your machine is reporting a blockaqe.
If there's no blockage it would suggest there's a fault in the motor or main board which is causing the error.

I have no test for this.

I'll opt out of your question and open it to all again.

Thanks
Customer: replied 3 years ago.
Thank you for your responses. As a qualified expert is unable to provide a solution I have decided to withdraw my question. Do I need to tell anyone else that I am doing this?
Expert:  Techdesk replied 3 years ago.
sorry, can't help with that.
if you don't want to wait to see if anyone else has come across this and has a user test that can be carried out, they you need to contact customer services.