Hi, welcome to Just answer
How old is this dryer ?
have you checked the thermostats with a multimeter ?
Yes and replaced the small black thermostat at the rear of machine under cowling
OK can you check the wires going to the control board ?
I can but not at present
OK, when you check it just make sure all the connections are fine and no loose wiring to the control ...also there is a thermal limiter that should be checked...if that is also fine then it is the control that will need replacement
there are two thermal limiters under the cowling at the rear under the cowling, one with a reset button. I have replaced the other and tested the resettable one as OK. Where is the third?
Yes that is right there are two, if both are fine then it is the control
Thank you I didn't want to hear that, as a control is circa £200.
Yes I understand...sorry about the bad news
Tks for help.
If you have further questions I will be pleased to assist you – please use the REPLY link for further assistance..Please remember to RATE my answer Excellent or Good Service when you are satisfied....Thanks