Hi Steve, welcome to Just answer
How old is this washer ?
well then in that case the problem should be solved after cleaning the drain pump assembly
unplug the unit, pull it out and then tilt it 45 degrees so that if there is any excess water inside it comes out
have you cleaned the drain pump assembly as well completely or just the hoses ?
was there a power failure when the washer was in use ?
sorry for the long delay
was checking its parts
what about the door lock LED
does it flash as well ?
unplug the appliance...try to clean the door lock assembly, you can blow some air as well on that and then plug it back in ...let me know if all 4 LEDs still flash
OK, can you test the door interlock assembly with a multimeter...if it tests fine then it is the control that will need replacement
OK sure no problem
OK, the door lock is fine what about the control ? if all lights are flashing it is the control that has to be replaced