How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andrew Smith Your Own Question
Andrew Smith
Andrew Smith, Home Appliance Technician
Category: Appliance
Satisfied Customers: 3629
Experience:  Gas cooker specialist
46681511
Type Your Appliance Question Here...
Andrew Smith is online now

Iv e got a Baxi Duo-Tec Combi 33 HE with a manual clock which

Customer Question

Iv 'e got a Baxi Duo-Tec Combi 33 HE with a manual clock which does not keep the time, want to install a Honeywell cm921room stat with timer is this possible and what do I need to do.

Many thanks

Bobby
Submitted: 3 years ago.
Category: Appliance
Expert:  Andrew Smith replied 3 years ago.

Andrew Smith : The easy way to do it would be leave the timer connected on 24hrs and wire the controller into the room stat circuit
JACUSTOMER-wcmwgffs- :

I want to fit a cm 921 Honeywell RF timer with a stat I do not want the boiler working on the stat

JACUSTOMER-wcmwgffs- :

Do I need to stay on line or will you e-mail me A.S.A.P

JACUSTOMER-wcmwgffs- :

Still waiting for a reply for my last

JACUSTOMER-wcmwgffs- :

This is an unsatisfactory answer i want to install a Honeywell wireless timer/stat

Andrew Smith : Sorry didn't realise you wanted RF until the reply
Andrew Smith : Again, you can link out the timer or leave it on continuous and link the programmable room stat into the room stat circuit
Andrew Smith : You will need to mount the receiver next to the boiler and give it power and take the two room stat connections through the receiver switch
JACUSTOMER-wcmwgffs- :

I already new i had to mount the receiver and give it power i needed to know what connections needed at boiler and to the receiver.

Andrew Smith :

Like I said, use the room stat connections and link them through the receiver

JACUSTOMER-wcmwgffs- : Thanks for nothing will make sure I will not beuseing
JACUSTOMER-wcmwgffs- : Your site again
Andrew Smith :

You have asked how to connect this and I have told you.

Andrew Smith :

Leave the heating on constant and wire the programmable room stat into the room stat circuit

Andrew Smith :

This will turn the heating on and off when required and not affect the hot water production

Andrew Smith :

I can send you a wiring diagram if you wish