How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask KevinWhiteJA Your Own Question
KevinWhiteJA
KevinWhiteJA, Home Appliance Technician
Category: Appliance
Satisfied Customers: 995
Experience:  Worked on appliances for more than 15 years
70193065
Type Your Appliance Question Here...
KevinWhiteJA is online now

I have a Logic dishwasher, which will not drain. the display

Customer Question

I have a Logic dishwasher, which will not drain. the display panel is displaying an E1 error.
Submitted: 3 years ago.
Category: Appliance
Expert:  KevinWhiteJA replied 3 years ago.

KevinWhiteJA :

Hi, welcome to Just answer

KevinWhiteJA :

Please tell me its complete model number

KevinWhiteJA :

and how old is it ?

JACUSTOMER-tdf7bfg3- :

The model number is LDW45S12, it is about a year old

KevinWhiteJA :

E1 error means fill time exceeded pre set time
The problem is due to a leak in the base of the dishwasher...you will have to unplug the appliance then pull it out and tilt the unit around 45 degrees to drain the water...you can also take off the drain pump and try to clean it completely...check and make sure there is no leak ...let me know how it goes

JACUSTOMER-tdf7bfg3- :

I have emptied the water out and then plugged it back in and turned the power on. the display console and all the program lights are now flashing. and the machine wont do anything else

KevinWhiteJA :

are you sure everything is cleaned and you have assembled it back correctly ?