How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Techdesk Your Own Question
Techdesk
Techdesk, Service Engineer
Category: Appliance
Satisfied Customers: 16409
Experience:  Whitegoods engineer working for a multibranded national company in the UK
13782322
Type Your Appliance Question Here...
Techdesk is online now

error2 keeps coming up on the washing machine during cycle.

Resolved Question:

error2 keeps coming up on the washing machine during cycle. Filter pump has been cleared out and the pump at the back been checked yet it continues to come up with error2
Submitted: 3 years ago.
Category: Appliance
Expert:  Techdesk replied 3 years ago.
Hiya,
Can you post the model number of the appliance please?

Thanks
Customer: replied 3 years ago.


BWR1005

Expert:  Techdesk replied 3 years ago.
Hiya,
Thanks for that.

When it stops, has it drained the water or is there water left?

Thanks
Customer: replied 3 years ago.

it has drained the water but clothing still wet, it doesnt go into the spin cycle

Expert:  Techdesk replied 3 years ago.
Hiya,
OK, if it's fully drained the fault lies in the pressure system.

Unplug the appliance
Take the top off
Locate the pressure switch (it's circular and it has a thin tube attached that goes to the bottom area of the machine)

Take the tube off and blow down the tube as hard and as long as you can.
Refit the tube and try the machine again.

What happens?

Thanks
Customer: replied 3 years ago.

thank you the washing machine is spinning, thank you for your help.

Expert:  Techdesk replied 3 years ago.
Hiya,
Thanks for letting me know.

It would be worthwhile running the machine on it's hottest wash, with nothing in it, to clean out some of the build up of soap inside the machine.

It's this that causes the restrictions in the pressure chamber.

Good luck with the machine.
Hope this helped
Thanks
Techdesk and other Appliance Specialists are ready to help you