How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask KevinWhiteJA Your Own Question
KevinWhiteJA
KevinWhiteJA, Home Appliance Technician
Category: Appliance
Satisfied Customers: 995
Experience:  Worked on appliances for more than 15 years
70193065
Type Your Appliance Question Here...
KevinWhiteJA is online now

hi diplomat dish washer starts then fills then empties straight

Resolved Question:

hi diplomat dish washer starts then fills then empties straight away and issues a continuous single beep
Submitted: 3 years ago.
Category: Appliance
Expert:  KevinWhiteJA replied 3 years ago.

KevinWhiteJA :

Hi, welcome to Just answer

KevinWhiteJA :

Please tell me its complete model number

KevinWhiteJA :

and how old is it ?

KevinWhiteJA :

Does it drain fine, do you hear any humm sound from the bottom of the dishwasher ?

Customer:

ADP8322

Customer:

Yes it hums when it starty

Customer:

it pumps out very quickly

Customer:

Its about 8 years old

KevinWhiteJA :

ok

KevinWhiteJA :

can you pull it out

KevinWhiteJA :

and lay on its side by around 45 degrees

KevinWhiteJA :

to check if any water comes out of the unit

Customer: Nothing comes out it seems to have drained completly
KevinWhiteJA :

ok and how many times does it flash ?

KevinWhiteJA :

I mean the start light

KevinWhiteJA :

can you count number of flashes and let me know how many times does it flash

Customer: It seems to keep
Customer: It seems to keep flashing single flashes and single beeps till I turn it off
KevinWhiteJA :

so single flash then off then single flash again...right ?

Customer: Yes that's it
KevinWhiteJA :

OK this indicates a fault with the temperature sensor...you will have to take the bottom panel out and then pour hot boiling water on the sump

KevinWhiteJA :

and make sure everything is clean in there

KevinWhiteJA :

then reset the machine and try to run it again

KevinWhiteJA :

let me know if error code returns

Customer: Sorry it is doing eleven flashes and then repeating
KevinWhiteJA :

11 flashes is a Water Indicator fault

KevinWhiteJA :

same solution... you will have to take the filters out and then pour some boiling water on the sump and clean it completely

KevinWhiteJA :

the problem is usually solved after it is cleaned completely

Customer: It seems to be running now. I will leave it to do a cycle. Thankyou will I need to change the sensor
KevinWhiteJA :

If you have further questions I will be pleased to assist you – please use the REPLY link for further assistance..Please remember to RATE my answer Excellent or Good Service ....Thanks

KevinWhiteJA and other Appliance Specialists are ready to help you

Related Appliance Questions