How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andrew Smith Your Own Question
Andrew Smith
Andrew Smith, Home Appliance Technician
Category: Appliance
Satisfied Customers: 3629
Experience:  Gas cooker specialist
46681511
Type Your Appliance Question Here...
Andrew Smith is online now

power shower 171351 cutting off

Customer Question

power shower 171351 cutting off
Submitted: 3 years ago.
Category: Appliance
Expert:  Andrew Smith replied 3 years ago.

XXXXX XXXXX : Is it working at all?
XXXXX XXXXX : Do you get good flow but then it slows to a dribble?
XXXXX XXXXX : do you know the age of the unit?
XXXXX XXXXX : Do you have the make and model?
XXXXX XXXXX : Section 10 of the manual shows internal filters;
XXXXX XXXXX : http://www.creda-showers.co.uk/media/uploads/7300070%20rev_A%20%20Fitting%20Instruction%20Creda%20(Thermo)%20Power%20Shower%20paginated.pdf
Customer:

Thank you for your response.It is a Creda power shower 171351.The shower is working intermittently. I have good flow. It is about 2 years old.

XXXXX XXXXX :

The link above shows the internal filters on page 10. The link is for the full Installation Manual

Andrew Smith and other Appliance Specialists are ready to help you
Customer: replied 3 years ago.

Hi, I checked filters ,which are all clean. When start button is pressed, the top dial goes up to three and stops within few seconds. The flow rate is ok.If you persist pressing the start button ,suddenly it will work.