When you try and start it is the door locking?
Is there water still inside the washer?
the door does not lock. there is no water in the machine
Ok do you get any flashing lights from it or any error codes coming up on the display when it does this?
just zero on the display
Ok if its not starting then its either down to a faulty door lock or the control board im afraid.
To test the door lock you need to open the door and remove the metal clamp from around the seal and unlip the door seal.
Then you can remove the door lock and pull it through the porthole from there.
Disconnect the wiring block and with a multimeter test between the 3 tags. Two of them should give a reading. If they don't then the door lock is at fault and will need to be replaced.
If the door lock checks out ok then im afraid the fault is with the control board sorry.
If you need anymore info just get back to me.