How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob
Rob, Home Appliance Technician
Category: Appliance
Satisfied Customers: 420
Experience:  20 yrs. experience with a major worldwide manufacturer.
14831508
Type Your Appliance Question Here...
Rob is online now

Hi we have a siemens larder fridge want to change door bottom

Customer Question

Hi we have a siemens larder fridge want to change door bottom hinge screws wont go in on left side have nylon blocks got to be change over
Submitted: 3 years ago.
Category: Appliance
Expert:  Techdesk replied 3 years ago.
Hiya,
Can you post the E-nr number of the appliance please?
It's on a label inside the fridge.

What is the problem you are having in getting the screws to go in?

Thanks
Customer: replied 3 years ago.

KS30RV11Gb/01

Customer: replied 3 years ago.

don't seem to be drilled screws don't even start to enter just feels like nylon block

Expert:  Techdesk replied 3 years ago.
Hiya,
Sorry for the delay, only just got back into the office.

There are no nylon blocks shown in the instruction sheet for reversing the door.

Simply the bottom bracket swaps sides and the screws.

Do you have the installation instructions for the machine?

Thanks
Customer: replied 3 years ago.

Hi there is a nylon block in each side screws enter nylon I would think must be nut inserted outside screws go through outside casing inside just go into nylon block , adjustable feet one go through metal hinge plate 6mm other side goes into nylon block also not tapped 8mm , only got instruction for use nothing in there about reversing the door

Expert:  Techdesk replied 3 years ago.
Hiya,
OK, copy and paste the following into a new browser window.
It should help you with the change over.
Originally I took from your question that the nylon blocks were for the bottom hinge but now I'm not so sure.


https://portal.bsh-partner.com/TCcustomBSH/controller/download_file?PDFOBID=rdcj7Uicdcso0pdmdb---OAy&UMOBID=rdcj7Vbcdcso0pdmdb---OAy


Let me know what you find.

Thanks