How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Techdesk Your Own Question
Techdesk
Techdesk, Service Engineer
Category: Appliance
Satisfied Customers: 16409
Experience:  Whitegoods engineer working for a multibranded national company in the UK
13782322
Type Your Appliance Question Here...
Techdesk is online now

We have a freezer E-NR GSD 2801GB/57 which we need to move

Resolved Question:

We have a freezer E-NR GSD 2801GB/57 which we need to move to have some building work done. Is it save to move it with the contents and then reconnect the power supply.
Submitted: 3 years ago.
Category: Appliance
Expert:  Techdesk replied 3 years ago.
Hiya,
You would be taking a risk doing this.

Whenever it's moved, it should be left to stand for at least 6 hours (preferably 24) to allow it to settle before plugging in.

If you don't do this, you could end up with a system blockage.
It's a gamble as it may work ok but to reduce risk, you should leave it standing.

I would advise against moving it and plugging it in straight away.

Sorry, not the news you were hoping for.

Hope this helps
Thanks
Techdesk and other Appliance Specialists are ready to help you