How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Techdesk Your Own Question
Techdesk
Techdesk, Service Engineer
Category: Appliance
Satisfied Customers: 16409
Experience:  Whitegoods engineer working for a multibranded national company in the UK
13782322
Type Your Appliance Question Here...
Techdesk is online now

I have a whirlpool dishwasher G2P DWI/1 and the spray arm inlet

Resolved Question:

I have a whirlpool dishwasher G2P DWI/1 and the spray arm inlet tube keeps coming out of its housing at the bottom where it connects at the back of the lower spray arm. How can I repair it
Submitted: 3 years ago.
Category: Appliance
Expert:  Techdesk replied 3 years ago.
Hiya,
There are 2 covers to replace that the tube plugs into.
This normally sorts the problem out.

Copy and paste the following into a new browser window. It will show the first part for replacement.


http://www.4whirlpool.co.uk/filter-sieve-cover/product.pl?pid=950208&query=481241818337


Copy and paste the following into a new browser window. It will show the second part for replacement.


http://www.4whirlpool.co.uk/sieve-filter-cover/product.pl?pid=950207&query=481241818341

As long as there's no damage to the tubes, this will sort the problem out.

Hope this helps
Let me know if you need more help.
Thanks
Techdesk and other Appliance Specialists are ready to help you
Customer: replied 3 years ago.
Do I need both those parts or just one or the other?
Expert:  Techdesk replied 3 years ago.
Hiya,
Fit both.
You can get away with 1 but, if you choose wrong, it still pops out.

I've never had a recall since I started fitting both.

Thanks