Hi, welcome to Just answer
Please tell me its complete model number
and how old is it ?
its ferolli. about 7 years old but i can't find the model no
what do i do next
and I believe you have already tried to reset it ?
and the gas flow to the broiler is good enough ?
i think so . when i turn it on it sounds like it is trying to fire up but stops after about 30 secs and the f1 flashes again
F1 error is usually a gas pressure error
if the flow is good
then the problem is either with the gas valve or the ignition of the unit
what do i do now?
are you willing to do this repair yourself ?
If its fairly simple and you can tell me how to do it
not that simple as you will have test few things
try me please
please check if the gas pressure is fine
if that is fine then check the gas valve
also check if the gas valve connector is loose
please check the correct model number on the unit and let me know
so that I can tell you how to check the valve
I wont recommend DIY until you are very much sure that you can do it
ok. but before you go, someone has just turned the pressure up and now water is coming out of the pipe . how do i lower the pressure?
Please check this Video it will give you an idea on how to do it
If you have further questions I will be pleased to assist you – please use the REPLY link for further assistance..Please remember to RATE my answer Excellent or Good Service ....Thanks