How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Your Own Question
Michael
Michael, Customer Service
Category: Appliance
Satisfied Customers: 9563
Experience:  I have been an appliance repair tech for over 30 years and will help you solve your problems.
11519491
Type Your Appliance Question Here...
Michael is online now

Hello. I have a lamona ceramic hob with front controls. Problem

Customer Question

Hello. I have a lamona ceramic hob with front controls. Problem is it will switch on but when I try to turm on the rings the display shows f/left A, b/left F, f/right 1, ansb/right 1. Also the safety lock is on and nothing works. Is this a big problem or can I fix it myself.
Submitted: 3 years ago.
Category: Appliance
Expert:  Michael replied 3 years ago.

Hi sorry to hear this,
the problem is the main control board has failed.
You can try turning power off at the mains for ten minutes, if that works thats great.
If not please let me know
I will stick with you until we have this fixed for you but since this may take some time, if you will rate my service in a positive fashion thus far before you close this page, the system will allow me to schedule free follow ups with you and also ensure your question will NOT close or time out;-)
You will then be able to contact me at anytime at no additional cost until we have this fixed for you.

Thank you *****
Michael and other Appliance Specialists are ready to help you
Customer: replied 3 years ago.

I have done already and still the same

Customer: replied 3 years ago.

donhis aready

Customer: replied 3 years ago.

I have done this already. You may have already got this message

Expert:  Michael replied 3 years ago.
Hi are you saying you already replaced the main board?
Thank you
Tech Michael
Customer: replied 3 years ago.

No. I have turned off the power a few times before you asked me to do so.


Thanks


Martin

Expert:  Michael replied 3 years ago.

Hi Martin,
have you replaced the main control board?
Sorry for the confusion a lot like this today lol.
Customer: replied 3 years ago.

No Sir. What's wrong is what I said in my first message. Powered off the hob a number of times and still the same display comes up and no response from the touch sensors. This only started last night.


Martin

Expert:  Michael replied 3 years ago.

Hi Martin may I have the full model # of your range it sounds like its just in child lock mode.

Expert:  Michael replied 3 years ago.
e

Related Appliance Questions