Hi, welcome to Just answer
Please tell me its complete model number
and how old is it ?
Its an intergrated dishwasher the numbers on the side is sgv53e13gb there are others if that is correct
OK and how old is it ?
3 years old
ok and where does the noise come from ?
I think its in the botton area inside. Just like its on the drying cycle
have you already tried to clean the water inlet valve and the inlet hose ?
so the lights come on but it wont fill and so will not proceed to next cycle ?
yes thats correct
ok...can you pull the dishwasher out and lay it on its side by around 45 degrees
if water comes out then try a cycle again
the problem seems to be with the water inlet valve that is bad and will need replacement
no sorry too heavy and just had disc removed!!
oh ok...then its better to get the water inlet valve replaced
ok I will get one on mon thanks
If you have further questions I will be pleased to assist you – please use the REPLY link for further assistance..Please remember to RATE my answer Excellent or Good Service when you are satisfied....Thanks