How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Your Own Question
Michael
Michael, Customer Service
Category: Appliance
Satisfied Customers: 9564
Experience:  I have been an appliance repair tech for over 30 years and will help you solve your problems.
11519491
Type Your Appliance Question Here...
Michael is online now

I have a whirlpool ADP 8000 dishwasher which is giving a F6

Resolved Question:

I have a whirlpool ADP 8000 dishwasher which is giving a F6 error code I have checked the water supply and inlet hose, these are ok, the fault code comes up at the end of a program but not always, rinse seems to be fine
Ray
Submitted: 2 years ago.
Category: Appliance
Expert:  Michael replied 2 years ago.
Hi,
Sorry to hear that.
Does your dishwasher complete the full wash cycle before you see this error?
Then the problem is with the MCU [Motor Control Unit].
Try changing the Motor Control Unit and the wire harness to the motor.
I will stick with you on this until its repaired, its easy to replace this part and I will assist you if you need me. It only requires a few basic hand tools and no soldering;-)
The best place to get that part for price and quality is Espares:
Sales/Parts
0844 9777 888
After sales
0333 4007 888
Monday to Friday 8am to 6pm, Saturday 9am to 4pm, or 10am to 4pm on Bank Holidays
For security and training purposes, telephone calls may be recorded or monitored.
Outside the UK? Call us on: +44 (0) 20 7717 5046.
Please dont forget to rate my service to you, kindly before closing this page you will still have access to me and you can contact me anytime
simply by replying to this message at no additional cost;-)
Thank you and have a great day!
Tech Michael
Michael and other Appliance Specialists are ready to help you
Customer: replied 2 years ago.
Ok thanks I will order parts today
Expert:  Michael replied 2 years ago.
Your welcome let me know when the parts come in and I will help you with this, and please rate kindly now;-)
Have a great day Ray!
Tech Michael
Customer: replied 2 years ago.
I take it that the wiring harness is from the mcu to the motor

Related Appliance Questions