How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George-Allsorts Your Own Question
George-Allsorts
George-Allsorts, Senior Appliance Technicial Manager
Category: Appliance
Satisfied Customers: 1448
Experience:  A whitegoods technician with 30+ years service in Domestic Appliance Service & Repair, and General Mechanical & Electrical Repair
19471162
Type Your Appliance Question Here...
George-Allsorts is online now

How to replace broken impeller inside Baumatic cooker hood

Customer Question

How to replace broken impeller inside Baumatic cooker hood F60.2ss? Is it possible at all?
I tried to remove the broken one but there is too little space inside the hood.
Submitted: 2 years ago.
Category: Appliance
Expert:  George-Allsorts replied 2 years ago.
George-Allsorts :

Hello, my name is***** you need to ask for more info, please do. Kindly be patient whilst awaiting responses, I'm only here part-time.

George-Allsorts :

Yes, the fan impellors are available.. There are two different ones and which one you need depends on your serial number.

George-Allsorts :

The whole motor has to come out to shange them

JACUSTOMER-tfhf7s9t- :

But the motor is fixed solid inside,with bolts, not screws. It cannot come out.

George-Allsorts :

Full Size Image

George-Allsorts :

As you can see.. the motor is bolted in from above or below ... once this is removed, the sides come off to get at what you need to do

George-Allsorts :

You need the serial number though in order to get the correct fan

JACUSTOMER-tfhf7s9t- :

How can I remove the bolts? With a screw driver?

George-Allsorts :

That depends on the type of bolts fitted... But to access them you remove the turret, remove the tube holder, and the bolts for the motor should be there in front of you on a square shaped surround

George-Allsorts :

Is there anything further that

George-Allsorts :

I can assist you with regarding this?

George-Allsorts :

Do you yet have the serial number so I can let you know which impeller to buy/

Related Appliance Questions