How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Your Own Question
Michael
Michael, Customer Service
Category: Appliance
Satisfied Customers: 9568
Experience:  I have been an appliance repair tech for over 30 years and will help you solve your problems.
11519491
Type Your Appliance Question Here...
Michael is online now
Appliance

my beko dwd5410 dishwasher is stuck on rinse cycle....i have

changed the control board but... Show More
changed the control board but it is still the same. what next
Submitted: 2 years ago.
Category: Appliance
Show Less
Ask Your Own Appliance Question
replied 2 years ago.
Hi I am sorry to hear that.
try something for me.
Pour a bowl of water in the machine.
Does it drain that water?
Also does it stop draining once you open the door?
Thanks
Tech Michael
Customer reply replied 2 years ago.

yes michael it drains perfectly and stops when the door is open but only does a short cycle and doesnt heat the water or expel the tablet as thou stuck on no 1 setting pre wash

Michael, Customer Service replied 2 years ago.
Hi Craig,
It sounds like it has gone into flood mode
This sounds like the machine has water in the base, where the pumps are.
This sets the flood guard and the discharge pump will run continuously in an effort to protect the electrics in the base.
Turn off the electric.
Pull machine forward.
Put towels down behind the machine.
Tilt machine back at 45 degrees.
Water will come out the back.
The machine should now be reset.
If this re occurs you have a leak and will need to find it and rectify it .
I will stick with you until this is fixed, please don’t forget to rate my service to you before you close this page. I will be available to you at no additional cost , you can then get in touch with me anytime by simply replying to this message.
Thank you and have a great day Craig!
Tech Michael