How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George-Allsorts Your Own Question
George-Allsorts, Senior Appliance Technicial Manager
Category: Appliance
Satisfied Customers: 1448
Experience:  A whitegoods technician with 30+ years service in Domestic Appliance Service & Repair, and General Mechanical & Electrical Repair
Type Your Appliance Question Here...
George-Allsorts is online now

AEG OKO-LAVAMAT 6555 sensorlogic (from 1996) Error code: 1200

Customer Question

AEG OKO-LAVAMAT 6555 sensorlogic (from 1996)
Error code: 1200 and 700 spin and end lights flashing at end of wash; door will not open. What is wrong and what is the fix?
Submitted: 3 years ago.
Category: Appliance
Expert:  Michael replied 3 years ago.
Hi I am Tech Michael, I am sorry to hear that.
Please be patient as these are technical issues and I want to guide you the best way possible to save you money and time;-)
Please remember these are technical issues and may require some back and forth conversation to sort this out.
Please try this as a test:
Unplug the washer for 30 full minutes then back in.
Let me know if the door will open or if any error flashes before you turn it on.
Also what happens when you do turn it on?
Thank you
Tech Michael
Customer: replied 3 years ago.

Surprise! That didn't work. No error flashes before switch on; same 1200, 700 spin lights and end lights flash when switched on.

Over to you.


Expert:  Michael replied 3 years ago.
Thanks for that Rob,
You need a new door lock mechanism.for sure.
Its not too expensive and I will help you replace it if you have a few basic hand tools and are a little handy;-)
Please check with these guys for that part:
I would call them instead of searching their page as its much quicker that way.
Also they usually ship the same day you call them.
Please call: 01325 302464
Mon - Thur: 8.30am - 5.00pm
Fri: 8.30am - 4.30pm
I will stick with you until this is fixed, please don’t forget to rate my service to you before you close this page. I will be available to you at no additional cost , you can then get in touch with me anytime by simply replying to this message.
Thank you and have a great day Robert.
Tech Michael
Expert:  George-Allsorts replied 3 years ago.
Hello Robert, my name is George.. Kindly be patient whilst awaiting responses as I'm not constantly available.

Check the motor brushes for excessive wear and if they have less than 8mm of carbon change them... Also, test the Motor tacho with a multimeter to ensure it is working..

If you need instructions for this, please let me know