Hello, my name is***** be patient whilst awaiting any responses as I'm not constantly available.Can you supply the product code from the label on the appliance please
Cleaner Model: AEL8840 Prod: *********
Remote part no: ********* 2
Can you retye those numbers pleasse but put a # ***** of them so that I can see them
Cleaner Model: #AEL8840 Prod: #910286939
Remote part no: #219405521/2
Thanks for that... one moment please
I have do leave my PC for an hour or so. I'll pick up again later.Sorry to mess around.
Sorry that took so long..
Reprogramming RF remote controller Press ON/OFF button on cleaner and keep it pressed while inserting the main plug. Keep the ON/OFF button pressed until the AUTO LED:s start flashing, the cleaner is now in RF learning mode. Release the ON/OFF button. On the remote control press the ON/OFF button. If the cleaner have received the new RF remote address the power bar will start flashing, indicating that the learning process is finalized. On the cleaner, press the ON/OFF button. The cleaner will now be in standby mode. Start the cleaner either with the remote control or on the cleaner.
OK.. Not a problem..
Gearge many thanks for your help, but I'm afraid it's still not working.
The sequence works up to the point where the AUTO LED flashes but pressing the remote on/off doesn't result in the power bar flashing.
Would that suggest a problem at the cleaner side do you think?
Sorry to say, in my opinion this would suggest a problem at the vacuum cleaner side