Hi, welcome to Just answer
How old is it ?
About five years but not heavily used
OK and the model number is ***** or ZWF7120P ?
Thanks... the error code EH3 indicates either a power supply fault or the main control board itself is bad and needs replacement
have you tried to plug in this washer to any other socket ?
No but surely the display would not light up if there is a soket problem. The code came up over Xmas hols when maching was not being used.
Sometimes it will still light up if the supply is not good
if the problem is still there with different socket then it is the main control board that needs replacement
I will try the socket and if that does it I will give ok rating later but for now only a poor rating as I could have done the answers so far
OK, seems like you know a lot...please unplug the unit and plug it back after 4-5 minutes, simultaneously press and hold the START button for 15 seconds... let me know how it goes