, my name is***** be patient whilst awaiting any responses as I'm not constantly available.Do you know the model number of the DO and the IH that you intend to install?
Most likely to be HBN53R550B oven and PIN675N17E hob or equivalent
Give me a few moments and I'll check
, sorry delay..
According to the information that I have just looked at, the hob is 9.5kW in total... This will require its own individual Double Pole isolator
Sorry thats a foreign language to me. I assume that means a separate supply from the fuse box
Sorry.. yes.. this means that it will need its own separate supply
Thank you. Have you had an experience of the 13amp induction hobs which just plug in, i assume they must be power restricted.
Sorry, I had to answer the phone..
!3amp IH... I have only ever seen these in a 1 plate and 2 plate version... These are not normally into a kitchen, but are use
The higher the wattage the greater the need separate mains cable supply
I have seen one in the bosch range which is 4 zone but seems the output is only 2990 watts rather than 7200 models
So in this scenario.. If you need it to fit 13amp restriction then the wattage has to be very low
do you know the model?
That is:2x 1.4 + 2x 1.8 = 6.4kWor2x 1.8 + 2x 2.5 = 8.6kW
Thanks George, i was just reading out of their book.
Thanks very much help
The first is on normal setting... the second is on Boost
If no further assistance is required, can I then ask you to take some time to assist me by clicking on the smiley faces that you can now see... This will help me as it rates my assistance with your problems
I am glad I could help you