Hi.. This is the relay on the side of the compressor which has been removed which simply plugs into the compressor. The wires that came off which I need to know where they connect are as follows - the brown, blue and earth wires of the mains supply flex-the brown and blue wires coming from the capacitor-the brown, blue and black from which I presume is from the controlsWould appreciate any assistance U could give..
Sorry for the delay ive not been able to download the picture on my phone during the day so had to wait till i got home with wifi
Looking at that picture then its wired up as follows.
Brown from the mains goes to the tags marked L
Blue from the mains goes to the tags marked N
Brown from the controls goes to the tags marked L
Blue from controls goes to the tags marked N
Black from the controls goes to the round over load thats marked T
Then the run capacitor the blue goes to 2 and the brown to 3
As to the earth wires it doesnt look like they go on that relay so it will be on the holder thats attched to the compressor thats were the earth wires will go.
Try that and that shoould sort it from there.