How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George-Allsorts Your Own Question
George-Allsorts
George-Allsorts, Senior Appliance Technicial Manager
Category: Appliance
Satisfied Customers: 1448
Experience:  A whitegoods technician with 30+ years service in Domestic Appliance Service & Repair, and General Mechanical & Electrical Repair
19471162
Type Your Appliance Question Here...
George-Allsorts is online now

how to fit Neff U1661N2GB/01 Hinge Receiver

Resolved Question:

how to fit Neff U1661N2GB/01 Hinge Receiver
Submitted: 2 years ago.
Category: Appliance
Expert:  George-Allsorts replied 2 years ago.
George-Allsorts :

Hello Ian, my name is George..

Can you give me the FD from the data plate please and I shall answer your query.

Kindly be patient whilst awaiting any responses from me as I'm not constantly available.

Customer:

Sorry for the late reply, just back home now.

Customer:

Here you go:- FD8303

George-Allsorts :

Ok, I can't judge... I am the same...

I shall leave instructions in the morning as I am about to retire

Customer:

Thanks, ***** ***** most apprecaited - Ian 07908 774531

George-Allsorts :

Morning Ian, this is simple but time consuming, so I will type it here and then call you..

Remove the cabinet from the unit

George-Allsorts :

Remove both doors

George-Allsorts :

It will help weight-wise if you remove the trays

George-Allsorts :

Having the appliance on a trolley, workbench, or likewise, lie it on the oposite side to which you wish to change the hinge receptor

George-Allsorts :

Remove all screws from the side panel itself.. any that are not holding the side panel on need not be removed.. ie. those with a hole around them

George-Allsorts :

Remove the screws from the lid on the side edge to which you are working

George-Allsorts :

Remove the screws from the base on the side to which you are working

George-Allsorts :

Pull away the edge of the base from the side panel

George-Allsorts :

Take off the side panel

George-Allsorts :

The front side trim may come with it

George-Allsorts :

Undo the screw underneath the hinge receptor.. (You may or may not need to remove a few more screws from the base for access to the screw.. depending on your tools)

George-Allsorts :

Undo the screw from the front of the hinge receptor and remove it from the appliance

George-Allsorts :

Replace the part and reassemble

George-Allsorts and other Appliance Specialists are ready to help you