Hi, welcome to Just answer
How old is this appliance ?
OK, have you already tried to clean the drain pump and the area inside the base is clean and dry ?
washer stopped mid cycle so water currently in base
OK, with the dishwasher unplugged pull it out and lay it on its back by around 45 degrees...after this is done make sure to clean the base... then plug it back and check if it works, if not then remove the base and clean the drain pump...let me know how it goes
Done both no different, still no lights on
OK, was the door closing properly before this issue begin ?
yes, no issues prior to today
Nothing to add?
a moment pls
sorry was checking it s parts
ok can you check the door switch
if the door will close properly then it is the control board that will need replacement
You can get back to me if you need any assistance and I will help with no additional charges....