Hi, welcome to Just answer
How old is it ?
probably about two years old
OK thanks for that
Bad service ?
anyways ...E4 is a overflow fault which indicates that the antiflood device located in the base of the unit has been activated because of overflow of water...with the dishwasher unplugged pull it out and lay it on its back by around 45 degrees...after this take off the bottom cover located under the door and clean the water from the base...then plug it back again and check if it works...if not please get back to me with the model number before rating it as Bad service again... Thanks
Thank you but I would like an engineer to visit ,and repair the machine, I do know what E4 stands for
ok thats good...have you already tried what I have suggested ?
Hello, my name is***** you let me know your postcode I can give you the contact details for an engineer who deals with Baumatic Dishwashers..If you don't need one please ignore this requestKindly be patient whilst awaiting any responses from me as I'm not constantly available.