How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 16780
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your Appliance Question Here...
Daniel is online now

onley about half the flame in the oven

Customer Question

onley about half the flame in the oven
Submitted: 2 years ago.
Category: Appliance
Expert:  Daniel replied 2 years ago.

Hi

Can you post the model number please.

Also can you explane a bit more on the fault as im not sure what you mean by ''onley about half the flame in the oven''

Regards

Customer: replied 2 years ago.

084.44822.4224

Expert:  Daniel replied 2 years ago.

I need the model number please. Its usually on a sticker on the inside of the door.

Also a bit more of whats its doing wrong or is the problem not all the burner is light up?

Regards

Customer: replied 2 years ago.

084.44822.4224 s/n908261078

Expert:  Daniel replied 2 years ago.
Again thats not a model number. Is this thats all on the sticker?
Customer: replied 2 years ago.

that is all the numbers that is on the door only half the burner has full flame the rest is about half flame

Expert:  Daniel replied 2 years ago.

Hi

Ok if its not an even flame then its going to be the burner itself at fault here.

As you say half is a full flame so we know the gas supply is fine. It will have a restriction in the burner casuing this. Ive seen it loads of times on gas ovens as its grease that builds up in there and causes this.

As the gas supply comming through is ok otherwise it will be all a low flame but even. As it isnt an even flam comming through the burner then the burner will need to be replaced on this to cure.

Replace the burner and that should do the trick. But you may struggle to get it without the model number as usually they need a model number to be able to get the part for you.

Regards

Daniel and other Appliance Specialists are ready to help you
Customer: replied 2 years ago.

what would the modle number look like

Expert:  Daniel replied 2 years ago.
It normally starts with a few letters and then numbers.