How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob
Rob, Home Appliance Technician
Category: Appliance
Satisfied Customers: 6991
Experience:  20 yrs. experience with a major worldwide manufacturer.
14831508
Type Your Appliance Question Here...
Rob is online now

My miele g1182 scvi dishwasher will not drain. I have renewed

Customer Question

hi, my miele g1182 scvi dishwasher will not drain. I have renewed the drain pump, but it still will not drain.
Submitted: 2 years ago.
Category: Appliance
Expert:  Rob replied 2 years ago.
Welcome, my name is ***** ***** I will be helping you with your problem today. If anything isn't clear, please just ask me.
How and where is the waste hose attached to the house waste?
Tell me whaat happens when you start any new cycle?
Is there water above the filters now?
Thanks
Rob
Customer: replied 2 years ago.
The waste pipe is clear and connected under the sink.
When I start a new cycle the dishwasher will fill but not drain.
There is water above the filters now, I have checked the filters and they are clean.
Expert:  Rob replied 2 years ago.
Hi Terry

Thanks
Disconect the hose from the sink and pull the hose back to the machine
+Lay the hose along the floor from the back of the machine, into a shallow bowl
Does the water flow into the bowl?

Rob
Customer: replied 2 years ago.
Yes the water flows into the bowl.
Expert:  Rob replied 2 years ago.
Great

OK
so get a bucket and put the bucket on thetop of the machine, with the hose in the bucket

Start a new cycle. Does the water get pumped into the bucket, then it starts to fill?

Rob
Customer: replied 2 years ago.
There is no water pumping into the bucket on top of the machine.
The inlet/drain light is flashing and the machine is full of water.
Expert:  Rob replied 2 years ago.
HI

OK
so this indicates that the problem is still the drain pump not running

When you first a=start any new cycle the drain pump should run for about 1 minute.
Its not doing this so yu need to check the wiring to the pump and test it for 240v at the beginning of the cycle
If you have 240v there, then the pump is faulty
If you dont, the likely culprit ids the main PCB not sending the signal to the pump

Lower the hose to the floor again to drain the water

If you ned more help, please just ask
In the meantime,

Can I ask you to take a moment and rate my responses so far? Please use the smiley faces / stars, which you should now see. Please remember you are rating me personally, not the website or the problems you have had with this machine.
This will not close your question and you can still come back to me if you need more help
Thanks
Rob


I may be stepping out for a short while