How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George-Allsorts Your Own Question
George-Allsorts
George-Allsorts, Senior Appliance Technicial Manager
Category: Appliance
Satisfied Customers: 1448
Experience:  A whitegoods technician with 30+ years service in Domestic Appliance Service & Repair, and General Mechanical & Electrical Repair
19471162
Type Your Appliance Question Here...
George-Allsorts is online now

Machine shows E40.Wiring from board to door lock shows two

Resolved Question:

Machine shows E40.Wiring from board to door lock shows two of four connectors burnt.Should I replace wiring & door lock,or just wiring.Wiring numbered on lock 2345. on board 2 red & 2 blue.Which goes to which.
Submitted: 2 years ago.
Category: Appliance
Expert:  George-Allsorts replied 2 years ago.
Hello, my name is George..

Can you let me know the Make and model please.

If the connectors are burnt then it is usual to replace the connectors and whatever wiring is damaged... Also replace the door lock.

Kindly be patient whilst awaiting any responses from me as I'm not constantly available.
Customer: replied 2 years ago.

make zanussi model essential

Expert:  George-Allsorts replied 2 years ago.
Thank you John,

If you have a look on the inside of the door there will be a label, and on the label it will have a Model and a PNC/Prod Code..

Can you let me know what they are please
Customer: replied 2 years ago.

PNC(elc)914522517(00)

CCF###-##-####021

MFC###-##-####002

FIRMWARE WBE 20306

this info under top lid.nothing inside door

Expert:  George-Allsorts replied 2 years ago.

Thanks again for that John,

For your future information, your model information is ZWF12280W (91452251700)

I cannot see the wiring on your appliance but the wiring should be black and red wires..

Are you any good at following a wiring diagram?

Expert:  George-Allsorts replied 2 years ago.

I cannot see the wiring on your appliance John, but the wiring should be black and red wires..

Are you any good at following a wiring diagram?

Customer: replied 2 years ago.

Can follow simple wiring diagrams

Expert:  George-Allsorts replied 2 years ago.
Do you have a black plug going into the door lock with 4 wires in it, and a black and a red plug at the board end with two wires in each?
Customer: replied 2 years ago.

Black & red plugson board.2 wires to each.

4 wires to white plug on door lock

All wires coloured grey.

Expert:  George-Allsorts replied 2 years ago.
Ok, then this wiring diagram should be easy for you to follow, better than me describing it.

Wiring diagram

Please rate the assistance so far... If you need further assistance, please ask
George-Allsorts and 2 other Appliance Specialists are ready to help you

Related Appliance Questions